Base Volume Bot vs Pump.fun Volume Bot: What Changes on Solana
A Base volume bot and a Pump.fun volume bot do the same job — real buys and sells from many wallets — but on chains with different fees, block times and launch venues, so the tool has to match the chain. On Base, use a bot that pays gas in ETH and routes through Aerodrome and Uniswap pools, like the Base Volume Bot. For a Pump.fun token on Solana, use a dedicated Pump.fun volume bot such as PumpWave, which is built around the bonding curve, Jito bundles and the move to Raydium.
Teams that launch on more than one chain often assume one tool can cover both. It cannot, and the reasons are practical rather than cosmetic. This guide walks through what actually changes when you move from Base to Pump.fun on Solana, so you can plan each launch with the right tool and realistic expectations.
Same job, different chain
On both chains, the goal of a volume bot is identical: produce genuine on-chain swaps from many distinct wallets, with varied sizes and irregular timing, so that a token shows steady activity and a growing maker count where traders look for it. On Base, that place is usually DEX Screener and DexTools. On Pump.fun, it is the launchpad’s own board first, and the aggregators after the token graduates.
What differs is everything underneath. Base is an Ethereum Layer 2 that runs EVM smart contracts and settles in ETH. Solana is a separate Layer 1 with its own account model, its own fee market and its own way of ordering transactions. A Base volume bot speaks EVM; a Pump.fun volume bot speaks Solana. The rest of this guide is about the details that follow from that one fact. If you are new to the Base side, start with what a Base volume bot is.
Fees: ETH gas vs Solana priority fees and Jito tips
On Base, every swap pays gas in native ETH. Fees are a small fraction of Ethereum mainnet, which is why spreading activity across thousands of small swaps is practical. The gas cost of a run depends on how many swaps it makes and how busy the network is, and a good tool lets you set gas priority rather than guessing.
On Solana, the cost structure has more parts. Each transaction pays a small base fee per signature, plus an optional priority fee that helps it land when the network is busy. Many Solana bots also send orders through Jito bundles, which carry a tip to the block producer. During a busy launch minute, priority fees and tips decide whether orders land on time, so a Pump.fun bot has to manage them actively.
The practical lesson is to compare what the bot fee covers. The Base Volume Bot pricing is a flat 1% of the volume you generate, paid in ETH on Base. On the Solana side, PumpWave publishes a flat 1% of target volume as its only payment, covering Solana base fees, priority fees, Jito tips, sub-wallet funding and its comment and favorite layer, with a minimum session of 100 SOL of target volume.
Block times and how a run is paced
Base produces a block roughly every two seconds, and with Flashblocks it gives sub-second pre-confirmations. A Base run is paced across a duration you choose — from 1 to 72 hours on this tool — with randomized gaps between trades so the chart does not show a mechanical rhythm.
Solana moves faster, with slots of roughly 400 milliseconds. That speed is a benefit, but it also means related orders can land in consecutive slots unless the bot spaces them on purpose. PumpWave publishes session lengths from 15 minutes to 10 hours, a minimum block gap between related orders and a fresh keypair per order, which is the kind of pacing detail that matters on a fast chain.
Where the token trades: pools vs bonding curves
This is the biggest structural difference between the two launch paths, and it changes how a volume bot has to behave across the life of a token.
Base: pools from the first trade
Most Base tokens trade in a Uniswap-style or Aerodrome pool from the start, with liquidity the team provides. Price moves according to the pool’s reserves, so pool depth decides how much volume a run can generate before slippage becomes expensive. That is why Base Volume Bot routes activity automatically to the pool with the deepest liquidity. Our guide to Base DEX volume across Aerodrome and Uniswap covers pool depth in detail.
Pump.fun: the bonding curve, then Raydium
A Pump.fun token starts on a bonding curve. There is no liquidity pool at first; the curve program sets the price from how much supply has been bought, so every buy moves the price up the curve and every sell moves it down. When the curve completes, the token graduates and liquidity moves into a Raydium pool, where it trades like any other AMM pair.
A Pump.fun volume bot therefore has two phases to handle in one launch. PumpWave states that it trades the bonding curve, follows the migration block by block after graduation, and re-points to the Raydium pool inside the same session, with optional mirrored flow on Meteora and Orca. Pump.fun token pages also carry a comment thread and favorites, which is why PumpWave includes auto-comments in 8 languages and auto-favorites. A Base token page on an aggregator has no equivalent, so this layer only matters on the Solana side.
Wallet funding on each chain
On Base, each maker wallet needs a little ETH for gas, and selling an ERC-20 token from a fresh wallet usually needs an approval before the first sell. You connect MetaMask, Coinbase Wallet or any WalletConnect wallet, sign the run, and keep custody of your funds. Base Volume Bot supports up to 5,000 unique maker wallets per cycle.
On Solana, each wallet needs SOL for fees, and holding an SPL token requires a token account with a small rent deposit that is returned when the account closes. PumpWave publishes a non-custodial model: you fund a session wallet you control, the engine derives 500 to 10,000 ephemeral sub-wallets with randomized funding amounts, your seed phrase and primary private key are never requested, and unspent balance is swept back on-chain at session end.
MEV and order routing
Base orders transactions through a sequencer rather than an open public mempool like Ethereum mainnet, which changes the MEV picture. Sensible trade sizing relative to pool depth and tight slippage limits remain the main protections, and Base Volume Bot exposes slippage tolerance, randomized sizes and an anti-MEV option in its advanced settings.
On Solana, Jito bundles do the heavy lifting. A bundle is a group of transactions that land together, in order, or not at all. PumpWave submits orders through Jito bundles over a private relay, lands each buy and its paired sell together and randomizes bundle tips. Different chain, different tools, same goal: keep generated trades from being picked off.
Side-by-side comparison
| Factor | Base (Base Volume Bot) | Pump.fun on Solana (PumpWave) |
|---|---|---|
| Network fees | Gas in ETH on an Ethereum Layer 2 | Base fee per signature, priority fees, Jito tips in SOL |
| Block pace | About 2 seconds, Flashblocks pre-confirmations | Slots of about 400 milliseconds |
| Launch venue | Uniswap or Aerodrome pool from the first trade | Bonding curve, then a Raydium pool after graduation |
| Bot fee | Flat 1% of generated volume, paid in ETH | Flat 1% of target volume, the only payment |
| Minimum run | 20 ETH, up to 1,000 ETH per run | 100 SOL target volume |
| Wallets | Up to 5,000 makers per cycle | 500 to 10,000 sub-wallets per session |
| Duration | 1 to 72 hours | 15 minutes to 10 hours |
| MEV handling | Sequencer ordering, slippage control, anti-MEV option | Jito bundles on a private relay, paired buy and sell |
| Engagement | Not applicable on aggregators | Auto-comments in 8 languages and auto-favorites |
Which bot to pick on each chain
The rule is simple: pick the bot that was built for the chain your token lives on. Use these steps to decide for each launch:
- Check where the contract lives. A 0x address on Base means an EVM token; a Pump.fun mint on Solana means an SPL token on a bonding curve.
- Check the stage. On Pump.fun, ask whether the token is still on the curve or already in its Raydium pool, and make sure the bot handles both.
- Size the run against liquidity. On Base, match volume to pool depth; on Solana, match the session to the curve and the pool it graduates into.
- Confirm custody and the fee. Never share a seed phrase, and read what the fee includes before you sign.
On Base: Base Volume Bot
For any token on Base, this is the tool we built for the job: non-custodial, user-signed transactions, ETH-native pricing at a flat 1% of generated volume, routing across Aerodrome and Uniswap, and full control over makers, duration, buy/sell ratio and slippage from one console. If trending is the goal, read how to get a Base token trending on DEX Screener before you configure a run.
On Pump.fun (Solana): PumpWave
For a Pump.fun token, we point teams to PumpWave. It is a non-custodial Pump.fun bot from PumpWave Labs that runs in a browser console with no install: paste the contract address, configure, fund the fee and start, with live metrics and pause, resume or stop at any time. It does not promise a trending rank and reports live numbers instead. If your Solana token has already graduated or you want the wider picture, PumpWave’s guide to its Solana volume bot explains how the same engine works on the Raydium side.
Key takeaways
- Base and Pump.fun volume bots share a goal but not a codebase: EVM and ETH on one side, Solana and SOL on the other.
- Base costs are ETH gas; Solana costs are base fees, priority fees and Jito tips, so check what the bot fee includes.
- Base tokens trade in pools from the start; Pump.fun tokens start on a bonding curve and graduate to Raydium.
- Solana’s faster slots make spacing and bundling more important for a Pump.fun bot.
- Use Base Volume Bot for Base tokens and PumpWave for Pump.fun tokens on Solana.
Frequently asked questions
Can I use a Base volume bot for a Pump.fun token?
No. A Base volume bot signs EVM transactions paid in ETH and routes through Base pools such as Aerodrome and Uniswap. A Pump.fun token is an SPL token on Solana that trades on a bonding curve, so it needs a bot built for Solana fees, Jito bundles and the move to Raydium. PumpWave is a Pump.fun volume bot built for that job.
Which chain is cheaper to run a volume bot on?
Both Base and Solana keep per-transaction network costs low, so the bot fee and the size of the run matter more than gas. Base Volume Bot charges a flat 1% of generated volume in ETH, and PumpWave charges a flat 1% of target volume in SOL that already includes priority fees and Jito tips. Compare the minimum run as well: 20 ETH here and 100 SOL on PumpWave.
Why does a Pump.fun volume bot need Jito bundles?
On Solana, Jito bundles group transactions so they land together, in order, with a tip to the block producer. That lets a bot keep a buy and its paired sell together and send orders through a private relay instead of the open path. PumpWave publishes that it routes orders this way with randomized tips.
What happens to a Pump.fun token after the bonding curve?
When the curve completes, the token graduates and liquidity moves into a Raydium pool. A Pump.fun volume bot should follow the token there in the same session. A Base token has no curve stage: it trades in a Uniswap-style or Aerodrome pool from the start, which is where Base Volume Bot routes activity.
Do I need different wallets for Base and Solana?
Yes. Base uses EVM wallets such as MetaMask, Coinbase Wallet or any WalletConnect wallet, funded with ETH. Solana uses separate keypairs funded with SOL. Each bot creates and funds its own maker or sub-wallets on its chain, and neither should ever ask for your seed phrase.
Launching on Base? Launch the Base Volume Bot and generate real on-chain volume for your token, or read our playbook on how to increase trading volume for a Base token.
Generate real volume on Base
Non-custodial, ETH-native, flat 1% fee. Connect a wallet, paste a Base contract and launch.
Launch the app